IKI-30E_1 : Transformer Monitor, Protection Relay according to EN 60255

PRODUCT INFORMATION


Product information "IKI-30E_1"

The IKI-30 is a transformer-powered Protection Relay according to IEC 60255, suitable for transformer ratings between 160..12500 kVA, as overload, short-circuit and earth short-circuit protection in combination with circuit breakers or power isolators, as well as overload protection in combination with load disconnectors and HRC fuses.

Self powered protection relay acc. IEC 60255

Applicable for transformers with nominal power between 160 and 12500 kVA; as overcurrent, short-circuit or earth-fault protection relay in combination with a circuit breaker and as overcurrent protection in combination with load breakers and high voltage fuses

Selectable tripping options

IDMT (ANSI 51)

2 DT (ANSI 51)

Instantaneous overcurrent characteristic (ANSI 50)

External fast tripping without delay

Optional earth fault protection

Release of tripping coil

Low-power coil (no external supply needed)

Standard tripping coil (with seperate power storage PSU unit )

Self test

On site test of function by test button

Dry contact for remote transmission of watchdog alarm

Free of maintenance, CT-powered

Power supply buffered by lithium battery (life cycle -> 15 years)

TECHNICAL DATA

Device data

Article number: 2500287_S092_DIW

Product designation: IKI-30 Transformer Monitor | Protection Relay according to EN 60254

Standard: IEC 60255-1

Dimensions and installation instructions

Case height x width x depth: 48 x 96 x 80 mm

Cutout height x width: 45 x 92 mm

Norm cutout dimensions: DIN 43700

Installation type: Panel mounting

Operating conditions

Operating temperature: -25°C ... 55°C

Storage temperature: -30°C ... 70°C

Protection class: IP40

Rated frequency: 50 Hz, 60 Hz

Technical Data Fault Protection Functions

Reset: 2h, automatic after load current restoring, manual

Setting / nominal current setting range: 5 .. 260 A

Protection levels: ANSI 50, ANSI 50N, ANSI 51

Intrinsic time: 43 ms

Threshold value I>>/In: 8 values settable: 2 .. 20

Delay time I>>: 8 values settable: 0 .. 2 s or deactivated

Threshold value UMZ I>: 8 values settable: 1.1 .. 3

Delay time UMZ: 16 values settable: 1 .. 300 s

Protection characteristics IDMT: IEC extremely invers, IEC very invers

Start value I>/In: 8 values settable: 1,1 .. 3

Displacement factor v I>: 8 values settable: 0,05 .. 10 s

Threshold value Ie>>: 8 values settable: 0.1 .. 2

Delay time tIe>>: 8 values settable: 0 .. 5 s

Interfaces and communication

Remote signalling: 2 dry contacts, NC / NO, alarm / tripping

Power supply

Power supply: 24 - 230 V AC/DC +- 10%; Power input < 1 Watt

Battery type: Lithium

CT-supplied: ✓

Notes on transformer supply: From primary current of at least 1 A

Datasheet